This is early beta for now! Can't handle all templates properly
Hankkija
Vastaanotettu Hilmaan | 2022-09-15 |
Ilmoituksen numero | 2022-108467 |
TED numero | 2022/S 181-511604 |
Ostajaorganisaatio | Geologian tutkimuskeskus (Geological Survey of Finland) (0244680-7 ) Vuorimiehentie 5 FI-02151 Espoo http://www.gtk.fi |
Hankinnan otsikkotiedot | Water Pilot Mintec 2.0 Laboratory (Water Pilot Lab) |
Hankinnan yhteenlaskettu kokonaisarvo koko ajalle (ilman alv:ta) arvio | 450 000 EUR |
Hankinnan yhteenlaskettu kokonaisarvo koko ajalle (ilman alv:ta) lopullinen | |
Alkuperäinen ilmoitus | https://www.hankintailmoitukset.fi/en/public/procurement/70038/notice/108467/overview |
Originaali JSON tietue | 108467.json |
Ostettava
Hankinnan lyhyt kuvaus | The subject of the procurement is the turn-key delivery of pilot-scale test rigs for Water Pilot Mintec 2.0 Laboratory (Water Pilot Lab) in GTK, Outokumpu, Finland. The subject of the procurement is the turn-key delivery of water treatment pilot-scale test rigs for “Water Pilot Laboratory” (“Water Pilot Lab”) in the Geological Survey of Finland, Outokumpu, Finland. The turn-key delivery includes: (a) design and engineering of automated pilot-scale industrial water treatment tests rigs based on the subject and requirements of the procurement, (b) delivery and installation at the Water Pilot Lab, (c) test startup, documentation, and training. For clarity, equipment and supplies that are required for the proper operation of the laboratory are included in the procurement. Four pilot-scale test rigs must address the following processes for the treatment of water from the industrial sector (extractive sector effluents: Test-rig 1: Chemical coagulation (coagulation stage and flocculation stage) or multi-stage chemical precipitation (first and second stages) followed by sedimentation. Test-rig 2: Electrochemical treatment (e.g., electrocoagulation, electrooxidation) followed by sedimentation. Test-rig 3: Adsorption and ion exchange process (fixed-bed columns). Test-rig 4: Membrane technologies (microfiltration, ultrafiltration, nanofiltration, reverse osmosis) with prefiltration. Ancillary equipment: Chemicals dosing station (6 lines), filter press for sludge dewatering, inlet and outlet buffer tanks (standard 1 m3 IBC containers). The estimated test-rig capacity does not exceed 250 L/h. Test-rig sizing and actual nominal capacity will be determined with the Vendor based on available module size and laboratory footprint (Water Pilot Lab total space: 85 m2 with a maximum height of 3.5 m). Required mode of operation: batch and continues. Process control and automation are required. Remote control is also necessary. Each test rig has to be individually monitored for process parameters depending on process requirements. Flow rate, pressure, and basic physico-chemical water quality parameters (measured with commercially available probes) are among these parameters. Each test rig has to work individually and as a part of a customisable interconnected water processing chain. Connections between test rigs are needed to ensure complete operation flexibility, allowing the possibility to connect test rigs in any order. |
Hankintanimikkeistö (CPV) pää | Instruments for checking physical characteristics (38400000) |
Hankintanimikkeistö (CPV) muut | Research and experimental development services (73100000) Collected and purified water (41000000) Instruments for checking physical characteristics (38400000) Installation services of measuring equipment (51210000) Design and execution of research and development (73300000) |
Aluekoodi | FI1D3 |
Pääasiallinen suorituspaikka | Outokumpu, Finland |