This is early beta for now! Can't handle all templates properly

Hankkija

Vastaanotettu Hilmaan2022-05-03
Ilmoituksen numero2022-100038
TED numero2022/S 089-242249
OstajaorganisaatioGeologian tutkimuskeskus (0244680-7 )
Vuorimiehentie 5
FI-02151 Espoo
https://www.gtk.fi/en
Hankinnan otsikkotiedotPrior Information Notice / Water Pilot Mintec 2.0 Laboratory (Water Pilot Lab)
Hankinnan yhteenlaskettu kokonaisarvo koko ajalle (ilman alv:ta) arvio450 000 EUR
Hankinnan yhteenlaskettu kokonaisarvo koko ajalle (ilman alv:ta) lopullinen
Alkuperäinen ilmoitushttps://www.hankintailmoitukset.fi/en/public/procurement/70038/notice/100038/overview
Originaali JSON tietue100038.json

Ostettava

Hankinnan lyhyt kuvausThe subject of the procurement is the turn-key delivery of pilot-scale test rigs for Water Pilot Mintec 2.0 Laboratory (Water Pilot Lab) in GTK, Outokumpu, Finland. The turn-key delivery includes (a) design and engineering of automated pilot-scale industrial water treatment systems based on the subject and requirements of the procurement, (b) delivery and installation at the Water Pilot Lab, (c) test startup, documentation, and training. For the sake of clarity, equipment and supplies that are required for the proper operation of the laboratory are included in the procurement. Four pilot-scale test rigs must address the following processes for the treatment of extractive sector effluents: Test-rig 1: Chemical coagulation (coagulation stage and flocculation stage) or multi-stage chemical precipitation (first stage and second stage) followed by sedimentation Test-rig 2: Electrochemical treatment (e.g., electrocoagulation, electrooxidation) followed by sedimentation Test-rig 3: Adsorption and ion exchange process (fixed-bed columns) Test-rig 4: Membrane technologies (microfiltration, ultrafiltration, nanofiltration, reverse osmosis) with prefiltration Ancillary equipment: Chemicals dosing station (6 lines), inlet and outlet buffer tanks (standard 1 m3 IBC containers). The estimated Test-rig capacity does not exceed 250 L/h. Test-rig sizing and actual nominal capacity will be determined with the Vendor for each Test-rig, based on available module size and laboratory footprint (Water Pilot Lab total space: 85 m2 with a maximum height of 3.5 m). Required mode of operation: batch and continues. Each Test-rig is individually automated and monitored for parameters (depending on process requirements) such as flow rate, pressure, and water physico-chemical parameters (measured with commercially available probes). Each Test-rig has to work individually and as a part of a customisable interconnected water processing chain. Connections between Test-rigs are needed to ensure the complete flexibility of operation, giving the possibility to connect Test-rigs in any order.
Hankintanimikkeistö (CPV) pääInstallation services (except software) (51000000)
Hankintanimikkeistö (CPV) muutResearch and experimental development services (73100000)
Collected and purified water (41000000)
Instruments for checking physical characteristics (38400000)
Installation services of measuring equipment (51210000)
Design and execution of research and development (73300000)
AluekoodiFI1D3
Pääasiallinen suorituspaikkaOutokumpu, Finland

Sopimukset